Wallcovering Installation & Maintenance Guide
SINGLE IMAGE AS WALL COVERING
The desired image will be divided into tiles of equal width
Max Width of each tile is 59 inches
Height: As per the order
SEAMLESS PATTERN AS WALL COVERING
The desired pattern will be divided into tiles of equal width
Max Width of each tile is 59 inches
Height: As per the order
Tiles are individual and are not repeated and must be installed as per their sequence number
General Information for the customer:
- All wall covering tiles comes with 0.5 inch overlap which can be removed after the installation
- The width of each tile can varry depending upon the size of the wall. Maximum width is 48 inch.
- In case of self-adhesive wall covering, we still advice to use chemical for installation.
- All tiles are market with their sequence number on the top with some extra white margin
- Please refer to our ‘Wall Measurement & Tile guide’ before placing the order
- Make sure that there is no seepage, chipping of the plaster or any sort of loose material on the wall
- Wall must be evenly smooth before starting the installation.
INSTALLATION
We specialises in Wall Covering installation. We provide high quality wallpaper installation to suit all your needs. We install different types of wall coverings including Woven or Non-woven, Self Adhesive or Non Adhesive, Paper or synthetic based substrate etc.
Our highly skilled team of installers will transform any space with precision and will advise you on /or undertake the necessary wall and ceiling preparation work.
Wall Covering is a tricky job, made easier through years of practice. We will not only meet your expectations – we will exceed them!
We at ‘Mera Wala Print’ uses a special chemical based adhesive for the installation of all Wall Coverings. All our substrate backing containing ‘non-woven’ or polyester fibres, which means that the wallcovering is dimensionally stable and doesn’t expand when wet. Allowing the paper to be hung dry from the roll, reducing the installation time by around half. No paste table is needed, there’s no soaking time, and it’s easier to cut around light switches and sockets, because the paper is dry.
Paste the wall’s dimensional stability also means there is less risk of bubbling, creasing or edge curl. Overall, it’s a much easier product for the newcomer to wallpaper.
Tip: Non-woven wallpapers perform best with a good, evenly spread coating of paste on the wall.
TILE INSTALLATION
All Wall Coverings are generally installed in tiles (Refer images above). All the tiles are printed with 0.5 inch of overlap which can be cut and removed after the installation is complete.
CLEANING, CARE & MAINTENANCE
- All our Wall Covering substrate are scratch resistant which gives longer durablity and makes most of our Wall Coverings easy to clean with only soap water and a cleaning sponge.
- Most of our Wall Covering substrate are UV protected which gives longer fade resistance but it is always advisable to use prints on the wall which is not directly exposed to sun light.
- DO NOT use any chemical based solutions or any hard cloth as it will remove the layer of ink.
- Dirt, dust and other marks can be simply cleaned using a damp cloth with soapy water.